![TotemCam horizontal direccion](https://www.totemmt.com/wp-content/uploads/2018/09/TotemCam_horizontal_direccion.jpg)
In this post you will find a useful video explaining some tips to place a Totem Cam in horizontal placements.
1.- First, choose the biggest size that it fits into the crack. It will be more stable.
![TotemCam choose big size](https://www.totemmt.com/wp-content/uploads/2018/09/TotemCam_choose_big_size.jpg)
2.- Second, place as deep as possible to minimize the possible side load.
![Totem Cam placed near the edge](https://www.totemmt.com/wp-content/uploads/2018/09/TotemCam_horizontal_incorrecto-300x213.jpg)
![Totem Cam placed deep](https://www.totemmt.com/wp-content/uploads/2018/09/TotemCam_horizontal_correcto-300x213.jpg)
3.- Third, place it with the outer lobes at the bottom. It’s more stable this way too.
![Totem Cam in horizontal, outer lobes at the bottom = more stability](https://www.totemmt.com/wp-content/uploads/2018/09/TotemCam_horizontal_position-300x213.jpg)
4.- Fourth, if the crack is shallow, align the cam with the expected load as much as possible.
![Totem Cam in shallow horizontal, align with the load.](https://www.totemmt.com/wp-content/uploads/2018/09/TotemCam_horizontal_direccion-300x213.jpg)
Please contact us in case of any doubt or comment.
Thank you,
Cheers..